S video

baggdexpo

Member
Joined
Jan 29, 2008
Messages
389
Reaction score
7
Location
Ohio
Has any 1 used this board before to make a game work on a tv?? This came off my old 50 inch marvel vs cap 2 but I can't remember what the wire were.... Here's a pic if any1 can help... ThanksImageUploadedByTapatalk1352922537.703426.jpg

ImageUploadedByTapatalk1352922552.306464.jpg
 
The # on the chip will help? Ok I'll have to look at it than... I know it works or did when I removed it.... Just not sure on the wires and not sure if it took power...
 
It probably takes power of some kind. I can't imagine how it would work without it.

I was asking for the IC # to see if there was a datasheet available. You can probably figure out the rest of the board if you have the datasheet.
 
Got it to work with a +5 to the orange..... Works fine with my capcom bowling... But when I hook it to my other 2 games it don't work... I tried it on a golden tee.... No luck.... And a NBA jam... No luck with that either.... Do they put out a diff sync then the capcom... No matter what I did I couldn't get it to work.... Thanks
 
"Doesn't work" is useless. What was the problem?

Trying to put a tv with s signal from my video board..... It didn't do a damn thing... Screen Just jumped with out a picture....

So now I just got in my new board VGA to CGA and it makes a pic on the tv but it only fills 75% of the center of the screen..... Tried a video wire and a s video wire.... Both did the same... I tried all the menu options and no luck making it fill the screen ....
 
Back
Top Bottom