fizgig
Permanently Banned for constant cyber bullying. Ge
My fellow Americans, I am pleased to tell you I just signed legislation which outlaws Russia forever. The bombing begins in five minutes - Ronald Reagan
Started with a pretty beat Rush'N off of Ebay for $500. It was a converted Joust with a control panel and marquee. The only thing left is the marquee and the internal parts which were chewed up pretty bad.
Cabinet and Hardware:
Built brand new black melamine cabinet
Stripped and powder coated, bolts, brackets, speaker mesh
Stripped artwork off wood control panel, bondo, sanded
Powder Coated coin doors, cleaned up coin bucket
New T-molding
New Locks
New Vinyl Casters
New Power Cord
New Speakers
New Marquee Light Fixture/Bulb
New buttons, restored and rebuilt joystick
Cleaned up inside mirror
Cosmetics:
Got the original art from the other guy who made the yellow version but needed to re-do most of it. The idea and original files were a good starting point.
Custom Bezel, CPO, Side art: unbelievable amount of time tweaking and dialing in these graphics, then printing and re-printing to get them to fit right on the cabinet.
CPO: Added logo, cleaned and straightened graphics, redid some parts
Side art: re-scanned my NOS side art, scaled up to fit williams cabinet, finished knife to go through entire logo. Cleaned up a lot of edges.
Bezel: re-worked bottom graphics and all edges, cleaned up fuzzy graphics, reorganized instruction area
Original Marquee (OK shape, looking for NOS or nice one)
Custom W Williams logo coin inserts
Electronics:
Cleanup/restored inside guts: power supply, wire harness, PCB, etc.
NOS 19 KORTEK Monitor
New Fan
New Speakers
Full gallery here:
http://s1256.photobucket.com/albums/ii486/fizgigKLOV/Rush N Attack Restoration/
__________________
Started with a pretty beat Rush'N off of Ebay for $500. It was a converted Joust with a control panel and marquee. The only thing left is the marquee and the internal parts which were chewed up pretty bad.
Cabinet and Hardware:
Built brand new black melamine cabinet
Stripped and powder coated, bolts, brackets, speaker mesh
Stripped artwork off wood control panel, bondo, sanded
Powder Coated coin doors, cleaned up coin bucket
New T-molding
New Locks
New Vinyl Casters
New Power Cord
New Speakers
New Marquee Light Fixture/Bulb
New buttons, restored and rebuilt joystick
Cleaned up inside mirror
Cosmetics:
Got the original art from the other guy who made the yellow version but needed to re-do most of it. The idea and original files were a good starting point.
Custom Bezel, CPO, Side art: unbelievable amount of time tweaking and dialing in these graphics, then printing and re-printing to get them to fit right on the cabinet.
CPO: Added logo, cleaned and straightened graphics, redid some parts
Side art: re-scanned my NOS side art, scaled up to fit williams cabinet, finished knife to go through entire logo. Cleaned up a lot of edges.
Bezel: re-worked bottom graphics and all edges, cleaned up fuzzy graphics, reorganized instruction area
Original Marquee (OK shape, looking for NOS or nice one)
Custom W Williams logo coin inserts
Electronics:
Cleanup/restored inside guts: power supply, wire harness, PCB, etc.
NOS 19 KORTEK Monitor
New Fan
New Speakers
Full gallery here:
http://s1256.photobucket.com/albums/ii486/fizgigKLOV/Rush N Attack Restoration/
__________________
Last edited:


