Rush the Rock Monitor Swap

WaynezWorld

New member
Joined
Jun 16, 2009
Messages
62
Reaction score
0
Location
Golden, Colorado
I have a Rush with the infamous Neotec 27E that constantly gives me grief. I just got my hands on a Wells D9200 from a GT2003 that I am going to Chop and use a 42" LCD. I am pretty sure it will fit size wise. And I believe that you can switch the Wells to a medium resolution with DIPs? Only other thing is the video connection Plug. Still need to make sure it will plug in directly or if it needs the syncs moved.

Am I forgetting anything?

Any comments welcome.

Peace, Wayne
 
A Golden Tee 2003 is a med res game as it is. Double check that it is a 2003, and that you have an adapter for your LCD before you cut it down for that LCD pedestal.
 
If it's a D9200 I think they're auto-sensing, so if you plug it into your Rush it should come right up. They've got a little board on the back where you can plug either a VGA or a standard video connector in, like the one in your Rush.
 
If it's a D9200 I think they're auto-sensing, so if you plug it into your Rush it should come right up. They've got a little board on the back where you can plug either a VGA or a standard video connector in, like the one in your Rush.

Forgot to mention this part. It is accurate. Though I have never liked the auto-sensing because on first power-up it just sounds stressful on the monitor. It really isn't, but it just doesn't quite sound good.
 
from Bad to BAD to the Bone.

I have never played this game like this before. The 9200 Rocks this Rush to the Core.
Swap was strait forward and a piece of cake. Only mod was to the power harness.
I will let you know how the GT cutdown goes. I may not use the 2003gt green board.
I am trying to get a 2012 unplugged that will work with any vga LCD screen.

Sorry got to get back to finding all those coins. RRRush....

Peace, Wayne
 
Back
Top Bottom