Rowe changers bc35 vs 3500

mike11

Active member
Joined
Mar 7, 2012
Messages
1,617
Reaction score
9
Location
Pennsylvania
I know I have a few 35s floating around and I also have some good boards for 3500s..... before I dig these out I'm wondering if the 3500 board can be used in the 35??? I'd like this unit to take new $5 and maybe even $10s where it's going .... I'm hoping to be able to do tne conversion with what I have .... I can't justify the $400 kit that's sold to add a mars

Thanks
 
Completely different system, they can't be interchanged. The
harnesses, CPUs, power supplies are all different.

I made my own "kit" for the place I work for BC-35's. It basically
counts the pulses coming from a DBA. Once it gets a pause it
then checks the pulses - 1,5,10 and 20 then dispenses accordingly
using the test buttons.

JD
 
But nothing beats the smoov operation of the original Rowe bill transports.
 
I have some working spare MPUs for BC-10s somewhere. When a guy in Rapid City shut down Pepe's Pizza FEC, I bought a couple machines and now realize I will never use them. He later found his spare part MPUs and sent them to me. I haven't seen them in a while though.
 
Last edited:
Heads up on some Rowe MPU's coming up for sale next week.
 
It's not next week, but I have found a few of these.
 
These have been sold.
 
Last edited:
Completely different system, they can't be interchanged. The
harnesses, CPUs, power supplies are all different.

I made my own "kit" for the place I work for BC-35's. It basically
counts the pulses coming from a DBA. Once it gets a pause it
then checks the pulses - 1,5,10 and 20 then dispenses accordingly
using the test buttons.

JD
Do you have a design for your "kit" that you would be willing to share?
 
Back
Top Bottom