Rowe Central Control Computer CD-100

BigBob

Active member
Joined
Jan 3, 2014
Messages
181
Reaction score
65
Location
Bonaire, Georgia
Is there a site that outlines the versions of CCC in the ROWE CD-100 Jukeboxes? I have 12 CD-100 ranging from the CD-100 to the CD-100H, also an Encore. Is the CCC interchangeable?

Picked these up from an operator and I am trying to see how many of these I can get going.
Thanks for any replies.
Bob
 
I don't know much about the CD Rowes (mine is a 45RPM model), but I looked at the manuals of all of the CD100 versions I could find, and:

CD-100 through CD-100C all show P/N 40832201 for the CCC assembly (PCB P/N 61031101)

CD-100E and CD-100F both show P/N 40832220 for the CCC ass'y (PCB P/N 61031120)

Not sure about D or after F, can't find manuals for those. Good luck with your jukes!
 
Is there a site that outlines the versions of CCC in the ROWE CD-100 Jukeboxes? I have 12 CD-100 ranging from the CD-100 to the CD-100H, also an Encore. Is the CCC interchangeable?

Picked these up from an operator and I am trying to see how many of these I can get going.
Thanks for any replies.
Bob
So do you find if these ccc are interchangeable? The cd100 xxx
 
Functionally interchangeable, although the earlier versions used an EPROM socket for the CCC that has 4 fewer pins. If you change the socket for the larger and use newer software (we have CCC 4.3 which seems to work fine in everything) everything works fine, at least to my knowledge. When we sell them they are set for free play only so..

If using the older bill transport units you need to have 2 resistors added (R92/R93 on the newer ones..I don't have a hacked one handy to show) to make an older one work with the cba2, but if you're using a mars BA it will not matter since that just pulses the coin line.
 
Back
Top Bottom