Rowe AMI accessory board question

m2electronics

New member
Joined
Dec 23, 2022
Messages
6
Reaction score
6
Location
Cumming, Georgia, APO/FPO
I have an accessory board for my Rowe jukebox. The second gen one with "stereo" bgm inputs. It seems like these sum to mono on the accessory board though. I'm trying to stream Bluetooth in when a record isn't playing. Am I missing something in my hookup/ assessment?
 
first let's start with the basics of communication. photos. take some photos of what you're referring to cuz there's like 1000's
of Rowe AMI jukeboxes, and 1000's of different boards that go into it. that's over 1 million different combinations...

here's a few examples:

asdfasfsasdfasfsd.jpg rowe-ami-jukebox-amplifier-accessory_1_0a877619f289b31b85f3032253fba169.jpg

49269546268_fab783579a_z.jpg rowe-ami-cd-100-jukebox-preamp_1_eb4934b08b843f963d092fe554573063.jpg
 
And none of those looked like the one I fixed in Omaha. It was a bubbler, and had the bad transistors in the "computer" that were in the Rowe service bulletin.
 
It's this one. It's an R91 with the 130 watt amp.
As far as I can tell the aux inputs are muted when a record isn't playing and they don't cut off when music plays. The background music input works as intended but it seems to be summed to
mono.
Is there a way to get a stereo music source into the jukebox without adding a separate relay or switch to unmute the amp? I was hoping the accessory board would cover this need.

D69C1AFA-9ED0-4A77-850C-9DB802CCA599.png
 
Back
Top Bottom