Rottendog System 11 CPU Confusion

Pinwizkid

Member
Joined
Aug 31, 2009
Messages
748
Reaction score
10
Location
Middle Island, New York
So I need to replace my Cyclone's CPU and am willing to shill out for a Rottendog. However, I'm a little confused:

The Rottendog site says it supports Cyclone, but K's Arcade product listing says that it does not support Taxi, Jokerz or Cyclone. As far as I can tell, K's Arcade is the only place selling these:

http://ksarcade.net/rottendog-boards/new-replacement-cpu-for-williams-system-11.html

Anybody know if this works in Cyclone for sure or not? Thanks,

-BB
 
Call ks

I have had good experiences with ksarcade phone support and their knowledge of rottendog products. If you give them a call, they will take the time to explain to you whether or not it will work.

You could also send the original board to coinopcouldron.com. They do a great job.
 
I have had good experiences with ksarcade phone support and their knowledge of rottendog products. If you give them a call, they will take the time to explain to you whether or not it will work.

You could also send the original board to coinopcouldron.com. They do a great job.

Thanks guys,

The original board worked fine in my machine for the past 9 years despite having battery acid damage. It has developed a switch matrix problem in which one row of switches is stuck on, but only kicks in after the game warms up. I suspect with a good cleaning it will continue to work fine, but I think I'd just rather upgrade since my Cyclone isn't going anywhere.

I will reach out to Jim and see what the status is on the Cyclone issue.

Thanks again,
-BB
 
Sounds like one of the 6821's around the battery area. I have cleaned up so many of those over the years. Cyclone is a great game. Todd
 
Back
Top Bottom