Rollergames shooter lane 1-way Ball Gate Wire

K3V

Well-known member
Joined
Jul 13, 2010
Messages
1,437
Reaction score
37
Location
Corfu, New York
My Rollergames is missing the wire from the entry lane 1-way ball gate (listed as part number 12-6911 on page 76 in the manual). Anyone know where to get one or advice on how to recreate something that will work to keep the ball from bouncing back into the plunger?

It's the gate at #39 on the image here. Thanks!

attachment.php
 

Attachments

  • Screen Shot 2012-06-16 at 9.45.44 AM.jpg
    Screen Shot 2012-06-16 at 9.45.44 AM.jpg
    22.7 KB · Views: 71
Thanks guys.

While waiting for my Pinbits shipment to arrive I got impatient and made one out of an old binder clip. Came out pretty good!

attachment.php


->

attachment.php


Unfortunately I started investigating my GI light issue and found this today:

attachment.php


:(
 

Attachments

  • BindersClipN00004.jpg
    BindersClipN00004.jpg
    34.9 KB · Views: 54
  • photo 1 (1).jpg
    photo 1 (1).jpg
    94.2 KB · Views: 51
  • photo 2 (1).jpg
    photo 2 (1).jpg
    96 KB · Views: 106
Yeah I repinned the connectors today. Waiting for a new header to arrive from Bob Roberts, then it's on.
 
I hope the board will hold the solder.

I've never seen IDC header pins with that much damage before.

But It never fails... Every system 11 game I've seen, the J6 or J7 connectors are usually always fried. But fortunately, they're the easiest to replace.
 
Mostly back up and running! Got backbox and rear GI going, lost the front along the way somewhere.
 

Attachments

  • photo (10).jpg
    photo (10).jpg
    92.4 KB · Views: 8
Back
Top Bottom