NEW Rock-Ola Pioneer Balloon Interest Check

flynn54321

Well-known member
Joined
Jan 13, 2008
Messages
6,244
Reaction score
176
Location
GREEN BAY, Wisconsin
I have scanned and vectorized the sideart and marquee for Pioneer Balloon. Now with the multi boards being available that play PB, I wanted to check and see how many people would be interested in a Marquee & Sideart package.
 

Attachments

  • IMG_4079.JPG
    IMG_4079.JPG
    168.3 KB · Views: 91
Not sure what you mean. Warp warp has off centered joystick, not ambidextrous, and is 4 way.
So you would have to have pioneer balloon CP and CPO to work with this art package? If I wanted to convert my original Rock ola cab, what point would it be to have the rest of the artwork , if I don't have the CPO?
 
So you would have to have pioneer balloon CP and CPO to work with this art package? If I wanted to convert my original Rock ola cab, what point would it be to have the rest of the artwork , if I don't have the CPO?
The layout is just incorrect for the control panel. There are other Rockola games that would be a 1:1 but for warp warp, the cpo would have to be custom.

here is a photo of warp warp next to eyes:

BFB110CB-4F52-4BE6-90F3-85C0E2129FE8.jpeg
 
I finished this artwork a few years back from my original HUO cabinet. Rich got a little behind and didn't get around to printing it. I talked with him last week and he is printing them now. Should be available for everyone shortly
 
Back
Top Bottom