flynn54321
Well-known member
Over the years I have reproduced almost every single part for Rock-Ola cabinets. Since there are various threads, I thought I would start this one which lists every part in one.
Here is everything you need to restore your Rock-Ola games. These have all been professionally reproduced to the exact specs of the originals.
1. Marquee Brackets (upper and lower marquee brackets – powder coated) (2 piece set - $40)
2. Control Panel Brackets (front rounded and back angled bracket – powder coated) (2 piece set $45)
3. Wooden Control Panel (WITH Fire / Jump button holes). Used on Eyes, Jump Bug, Pioneer Balloon, & Mermaid. ($40 each)
4. Wooden Control Panel (WITHOUT Fire / Jump button holes). Used on Fantasy & Nibbler. ($40 each)
5. Wooden Control Panel for Warp Warp. ($40 each)
6. Monitor Bezel Plexi - (Blue). Used on Eyes, Jump Bug, Pioneer Balloon, & Mermaid. These are screen-printed on plexi just like the originals. Bezels come with a premask to prevent scratching during shipping. Comes with a choice of RED or WHITE "One Quarter Per Player" insert. If ordering for Pioneer Balloon or Eyes, "Initials" sticker is included. ($79 each)
7. Rock-Ola Monitor Bezel Plexi - (Green). Used on Fantasy & Nibbler. These are screen-printed on plexi just like the originals. Bezels come with a premask to prevent scratching during shipping. Comes with a choice of RED or WHITE "One Quarter Per Player" insert. ($79 each)
8. Metal Joystick Plate – powder coated (Blue) . Used on Eyes, Jump Bug, Pioneer Balloon, & Mermaid. ($20 each)
9. Metal Joystick Plate – powder coated (Green) . Used on Fantasy & Nibbler. ($20 each)
10. Marquee Light Fixture Brackets (these are often times bent). Includes ballast plate. (2 brackets and 1 plate $25)
11. Control Panel Lockdown Brackets (these are often times missing or bent). (2 piece set - $15)
12. Back Retainer Bracket. This bracket mounts behind the bezel to keep it from sliding backwards into the machine. ($12 each)
13. Vent Panel (WITH power switch hole and ground screw) ($20 each)
14. Vent Panel (WITHOUT power switch hole) ($15 each)
15. Lockout Switch Mounting Bracket. ($12 each)
16. Back Door Cam Lock Mounting Bracket & Plate. (2 piece set $25)
17. Monitor Mounting Shroud. Comes with top and bottom metal brackets, left and right wood mounting panels, as well as the hardware needed (screws, bolts, washers, nuts) to assemble. ($45 each)
18. Monitor Mounting Brackets. (2 piece set - $30)
19. TBA
20. Pioneer Balloon Shirts. Screen printed on blue cotton shirt. ($20 each – please check for size availability)
21. QB-3 Shirts. Screen printed on black dry-fit shirt. ($20 each – please check for size availability)
Prices DO NOT include shipping.
Sorry no International shipping at this time.
Here is everything you need to restore your Rock-Ola games. These have all been professionally reproduced to the exact specs of the originals.
1. Marquee Brackets (upper and lower marquee brackets – powder coated) (2 piece set - $40)
2. Control Panel Brackets (front rounded and back angled bracket – powder coated) (2 piece set $45)
3. Wooden Control Panel (WITH Fire / Jump button holes). Used on Eyes, Jump Bug, Pioneer Balloon, & Mermaid. ($40 each)
4. Wooden Control Panel (WITHOUT Fire / Jump button holes). Used on Fantasy & Nibbler. ($40 each)
5. Wooden Control Panel for Warp Warp. ($40 each)
6. Monitor Bezel Plexi - (Blue). Used on Eyes, Jump Bug, Pioneer Balloon, & Mermaid. These are screen-printed on plexi just like the originals. Bezels come with a premask to prevent scratching during shipping. Comes with a choice of RED or WHITE "One Quarter Per Player" insert. If ordering for Pioneer Balloon or Eyes, "Initials" sticker is included. ($79 each)
7. Rock-Ola Monitor Bezel Plexi - (Green). Used on Fantasy & Nibbler. These are screen-printed on plexi just like the originals. Bezels come with a premask to prevent scratching during shipping. Comes with a choice of RED or WHITE "One Quarter Per Player" insert. ($79 each)
8. Metal Joystick Plate – powder coated (Blue) . Used on Eyes, Jump Bug, Pioneer Balloon, & Mermaid. ($20 each)
9. Metal Joystick Plate – powder coated (Green) . Used on Fantasy & Nibbler. ($20 each)
10. Marquee Light Fixture Brackets (these are often times bent). Includes ballast plate. (2 brackets and 1 plate $25)
11. Control Panel Lockdown Brackets (these are often times missing or bent). (2 piece set - $15)
12. Back Retainer Bracket. This bracket mounts behind the bezel to keep it from sliding backwards into the machine. ($12 each)
13. Vent Panel (WITH power switch hole and ground screw) ($20 each)
14. Vent Panel (WITHOUT power switch hole) ($15 each)
15. Lockout Switch Mounting Bracket. ($12 each)
16. Back Door Cam Lock Mounting Bracket & Plate. (2 piece set $25)
17. Monitor Mounting Shroud. Comes with top and bottom metal brackets, left and right wood mounting panels, as well as the hardware needed (screws, bolts, washers, nuts) to assemble. ($45 each)
18. Monitor Mounting Brackets. (2 piece set - $30)
19. TBA
20. Pioneer Balloon Shirts. Screen printed on blue cotton shirt. ($20 each – please check for size availability)
21. QB-3 Shirts. Screen printed on black dry-fit shirt. ($20 each – please check for size availability)
Prices DO NOT include shipping.
Sorry no International shipping at this time.
Last edited:



