Robotron Wiring

Kegger

Member
Joined
Jan 29, 2011
Messages
71
Reaction score
1
Location
Connecticut
Can someone tell me what the white switch is for when the coin door closes and also what the white switch does inside the cash box. Reading the schematic for the cabinet wiring it talks about the cash box advance but I don't see anything for the coin door switch.
I'm in the middle of wiring up the coin door and those switches and just need some clarification on those white switches. Are they the same and just need to be wired in parallel?

Thanks
Keg
 
Interlock switches for the coin door and bucket. they have separate signal wires but share the same ground iirc.
 
Thank you Brood....I have it wired up and everything seems to work except for fire right which did work before...I'll have to check the connections for the controls but everything else seems to work and I can get through all the test screen and such.
 
The coin door advance is wired in parallel with the advance switch inside the coin door. This was so that the person pulling the cash could look at the bookkeeping stats but not reset them. The coin door needs to be open to reset the bookkeeping totals.

ken
 
YellowDog thank you for that info, I ended up wiring them correctly but now I understand how they work.
 
You are welcome. There normally is a set of instructions on a paper sticker on the inside of the lower coin door. It sounds like the instructions were missing on your cabinet (not to unusual). I am not sure if anyone has reproduced the stickers or not.

ken
 
If anyone wants to take that project on, I spent some time vectoring the stickers from all over the cabinet including the serial number stickers found on some of the boards... I'd be happy to provide the file if I can snag a set :)
 
If anyone wants to take that project on, I spent some time vectoring the stickers from all over the cabinet including the serial number stickers found on some of the boards... I'd be happy to provide the file if I can snag a set :)

i'd like a copy of those as well, not sure when i'd be able to have them printed but if i did i'd hook you up (as long as it doesn't include the backdoor sheet) (that'd be expensive to have printed).

phet repro'd this sticker that the OP is looking for, if you ask nice enough he might share it with you as well :D

i'm working with rich to hopefully get the coin door test switch label repro'd as well, seems there's some issues with the file i got tho :(
 
Back
Top Bottom