wraywray Member Donor 2015 VAPS Joined Mar 14, 2015 Messages 573 Reaction score 9 Location Bedford, Indiana Jul 22, 2016 #1 getting a ram 26 error. power is dead on. doesnt happen all the time. has anyone ran into this or knows what might be causing this?
getting a ram 26 error. power is dead on. doesnt happen all the time. has anyone ran into this or knows what might be causing this?
HPR pinball Active member VAPS Joined Apr 22, 2014 Messages 420 Reaction score 92 Location Laval, Quebec, Canada Jul 22, 2016 #2 Those Williams vids and pins are made with IDC connectors and they are 30 years old now and those contact are not 100% permanent and clean with ages. I replaced all of them with molex and my Robotron is 100% trouble free for 2 years now.
Those Williams vids and pins are made with IDC connectors and they are 30 years old now and those contact are not 100% permanent and clean with ages. I replaced all of them with molex and my Robotron is 100% trouble free for 2 years now.
OP OP wraywray Member Donor 2015 VAPS Joined Mar 14, 2015 Messages 573 Reaction score 9 Location Bedford, Indiana Jul 22, 2016 #3 thats a good idea. i will find some time and replace what i can.
mecha Well-known member VAPS Joined Apr 19, 2007 Messages 24,349 Reaction score 7,057 Location MKE, Wisconsin Jul 22, 2016 #4 there's more: http://forums.arcade-museum.com/showthread.php?t=381104 the socket could be bad or gummed up though. this last Sinistar board I got in I wound up just spraying all the ram sockets with deoxit. that pesky 0-3-1 error went away.
there's more: http://forums.arcade-museum.com/showthread.php?t=381104 the socket could be bad or gummed up though. this last Sinistar board I got in I wound up just spraying all the ram sockets with deoxit. that pesky 0-3-1 error went away.