Ridge Racer V - Arcade Battle, "Motor error 20"

t152

Member
Joined
Oct 16, 2007
Messages
65
Reaction score
1
Location
Zurich, Zurich, Switzerland
Ridge Racer V - Arcade Battle, "Motor error 20"

I got this message appearing on screen - and yes, it's "Motor error 20" not "Monitor error 20". Anybody knowing what that means ? Is there a connection missing somewhere ? Thanks.
 
the mean is obvious. there's something wrong that cpu didn't receive response from steering motor force feedback. but the cause, i can't really say which. one time i got this message, i replug any sockets and cable to motor driver pcb and test again, the error gone.
 
the mean is obvious. there's something wrong that cpu didn't receive response from steering motor force feedback. but the cause, i can't really say which. one time i got this message, i replug any sockets and cable to motor driver pcb and test again, the error gone.

Thanks, I replugged all connectors and error 20 is gone... but 'error 13' appeared right after... any ideas ? It must be related to the drive board as error 13 says 'replace the board'... but in more detail, what's wrong with it?
 
Last edited:
i've never encounter error 13 before. you can check the usual component on board, fuses, transistors etc.
 
i've never encounter error 13 before. you can check the usual component on board, fuses, transistors etc.

Ok, I checked all connectors and am now encountering 'Motor error 10'. The thing is I'm
not having an original cab with the motor/steering wheel. Just a wheel from an outrun cab.
Is there a possibitily(e.g. settings) to get around these checks and get RR5 working with a simple driving cab without moving wheel ?
 
Back
Top Bottom