REVIEW: Multi Williams CPO from Arcadeoverlays

Deadly

New member
Joined
Feb 10, 2006
Messages
6,162
Reaction score
31
Location
Gresham, Oregon
First of all I want to thank Todd @ Arcadeoverlays.com. He is and always has been very quick to repsond to emails and equally as quick on shipping and his prices are VERY reasonable. So on to the review.

After emailing Todd and asking for prices he responded within 2 hours. Giving me a price and suprisingly Todd even told me to make sure the panel is painted black because the colors will appear some what faded.
He is absolutely 100% correct. While the colors appear nice with the back laminate still on it, it is a must to paint your panel black before applying the artwork. Otherwise the colors appear some what light and washed out.

Pic #1 is a close up to show how very nice and crisp the lines and such are.

Pic #2 is also a close up to show places where the overlay can be seen having tiiiiiiny small spots that appear. Small adhesionless spots if you will. Nothing to be alarmed about - but my reviews are always beyond honest and anal right?

Pic #3 is shot with a flash to show just how nice and vibrant the colors really are!

Pic #4 to show the artwork applied to a CP

Pic #5 of course is to show the finished product and how very nice it looks!

Don;t quote me but IIRC Todd said the material is 12mil. It's thick - and downright bullet proof. Wow - heavy duty doesn't even begin to do it justice!

I have one gripe and one gripe only. Todds products are not pre-cut. If there is a button hole, you have to physically cut it out. While it's not a big deal, when you have a piece of artwork like the dual playchoice CPO that has no button blank holes to use as a guide it can get tricky trying to line it up.

This is the 3rd time I've ordered from Todd.
I give Todd an A+ on the Williams Multi CPO. Great product, great price, fast shipping and communication is always awesome.
I encourage all of you to feel comfortable when ordering from Arcadeoverlays.com.
 

Attachments

  • DSCF9717.jpg
    DSCF9717.jpg
    94.2 KB · Views: 86
  • DSCF9718.jpg
    DSCF9718.jpg
    94.5 KB · Views: 81
  • DSCF9721.jpg
    DSCF9721.jpg
    97.8 KB · Views: 87
  • DSCF9722.jpg
    DSCF9722.jpg
    95.3 KB · Views: 129
  • DSCF9723.jpg
    DSCF9723.jpg
    96.2 KB · Views: 108
probably a stupid question....
is that for any williams control panel?

I am going to make a narc in a jrok multi williams. and need to get some custom artwork
for it. (huge control panel)

maybe I am stuck with mamemarquees for that huh?
 
Thanks for that review! Looks good to me, if no official repros come out by the time I start on my MW project I will be buying one of those!
 
Last edited:
probably a stupid question....
is that for any williams control panel?

I am going to make a narc in a jrok multi williams. and need to get some custom artwork
for it. (huge control panel)

maybe I am stuck with mamemarquees for that huh?

Todd can custom make one for you of any size so no you're not stuck using Mamemarquees. The one he made me is for a Robotron, Joust, Stargate style CP. Of course having my buddy custom make me a CP was fashioned after the measurments of the listed CP's. You need to simply tell Todd what size your CP is.

@ Shillmover - not sure what Todd is charging - Todd cut me a deal so I have emailed him asking what general pricing is for them. BTW - would've been nice to have had your Robotron MW CPO done but you never responded to my PM's.
 
@ Shillmover - not sure what Todd is charging - Todd cut me a deal so I have emailed him asking what general pricing is for them. BTW - would've been nice to have had your Robotron MW CPO done but you never responded to my PM's.

Sorry about that. I could not find the files... Thought I responded. My bad..
 
Back
Top Bottom