You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
$4,000
$3,500
Local pickup
Rhinelander, WI 54501
I'll say "restored" as it was an attempted restore. You can view my rant thread about this machine if you search.
I had to do some work on it and replace some parts. One motor that was almost $200.
Hurts me looking at it as it was part of a 2 pinball trade. Just rather sell it.
Here's what previous seller said was done:
- New wood grain vinyl sides
- New side art
- New front glass
- New cpo
- New base
- Replacement brass lift rod with 3d printed guides
- Replacement switching power supply
- Free-Play rom
- Warm-White LEDs
I had to replace 1 motor as it was original really loud. The other was already replaced so it is nice and quiet now.
Things to keep in mind that bothered me is the replacement plexi that holds the hole switches is not very well done. That is why I had to adjust most hole switches after receiving it. There are some cracks in it from probably not pre drilling holes. The plexi is screwed to the black plastic ball track and some screws are stripped. Might have to glue them in so the plexi doesn't come loose. Oh and the front bottom by the speaker has a crack in the wood that was never fixed, but painted over.