FS Parts: Reproduction - Williams Speaker Grills - AVAILABLE AGAIN !

Winslow

Well-known member
Joined
Apr 17, 2008
Messages
1,314
Reaction score
219
Location
Castaic, California
Rating - 100%
59   0   0
HELLO ARCADE COLLECTORS!

I have received a FRESH batch of these Williams speaker grill reproductions. These CUSTOM PARTS are available NOW with quick shipping! The speaker grills are custom cut and bent in perforated steel. The hole pattern is nearly a perfect match to the original Williams plastic grills. Only these are thick, glossy black powder coated STEEL! They will never crack or fail like the original brittle grills.

They are available for the following Williams titles: Joust, Robotron, Stargate, Varkon, Bubbles, Sinistar, Moon Patrol and Defender.

There may be some other Williams titles that can benefit from these grills but that depends on the cabinet used for those particular games. Please check the measurements on your speaker panel and contact me if you are unsure whether these are going to work for your particular game.

$45 each. Shipping prices are $25.00 for one grill within most locations in CONUS. Multiple pieces, International and outside CONUS shipments will require a shipping quote. Steel is heavy, shipping is expensive! Please contact me directly with your required quantity and your shipping address to---> [email protected]

Payments can be made directly to my PP email address: [email protected]. "Friends and Family" is preferred OR you can simply include the PP fee, if you like.

Be sure to include a note with your payment specifying exactly what you are buying and include your mailing address in the note! Shipping NOW!


  • Photo Jun 23, 5 57 30 PM.jpg
  • Sinistar with new grill.jpg
  • Robotron Speaker New Grill Installed.jpg
 
Lots of these grills have been ordered in this past week. I really am motivated by everyone's interest in my projects! Your support over the years has enabled me to continue to produced these parts and I sincerely appreciate your patronage.

The medium sized grills that fit Joust / Robotron / Stargate and Varkon are now almost sold out. Less than 10 are available and I expect them to be gone, soon...... Arcadeshop is also now fully stocked up with all sizes. You can get them there if I run out.

All orders as of today have shipped! Please LMK if you have received them and what you think of them!

Thanks for your feedback.

Steve
 
Thanks for the update Bee423. I appreciate your feedback. Dozens of grills have shipped since the newest batch was completed. A few more are going out today. Currently, I have only a handful of the Robotron / Joust sized grills left. Order yours now before they're out of stock again. Thanks for looking !
 

Attachments

  • Robotron speaker grill.jpeg
    Robotron speaker grill.jpeg
    648.8 KB · Views: 20
Only a handful of medium sized speakers grills remain. These fit Robotron, Joust, Stargate and Varkon. Get yours now before they are gone. I appreciate all the orders and support. Anyone got any pictures of these grills installed in your game?
 
I have one of these in my Robotron and it's really awesome. So much better than the original.
 
Last edited:
Thank You Torance. I appreciate the feedback.

These grills are still shipping everyday. Medium grills are almost gone. Don't wait to order them for your New Years Projects!

Thanks !
 
Medium sized speaker grills for Joust, Robotron, Stargate and Varkon are currently sold out. You may still be able to buy some over at Arcade Shop!

Large and Small grills are still available for Defender, Bubbles, Moon Patrol and Sinistar.

Get them now before they sell out.

I appreciate you!! Thanks for looking.

Steve
 
Are there much difference in sizes in these speaker grills, and are they all produced in the same form style, i.e. grill going round the edges?

I'm only asking as I have a Williams Defender cab I've started getting sorted and I'm looking to repo the speaker grill as well, only I'm in Ireland and shipping is a pain in the rear end. I've been hunting for a suitable grill mesh, but the ones I'm looking at seem to be expensive.

Edit:
Just seen the sizes posted way back in March 2014
7 1/2" x 24 3/8" 3/4" bend (Robotron & Joust)​
7 1/2" x 22 7/8" 3/4" bend (Moon Patrol, Sinistar, Bubbles)​
9 5/8" x 24 3/8" 3/4" bend (Defender)​
 
Thanks for all the orders and inquiries about my speaker grills. At this time, I am SOLD OUT of medium sized grills that are used on Robotron, Joust, Stargate and Varkon. This size grills can still be bought from Arcade Shop - who does have a limited stock - don't wait if you need one!

Currently, you can purchase grills directly from me for the following titles:

Defender
Moon Patrol
Sinistar
Bubbles

You can PP $45 (friends and family or cover the fee) + $25 for CONUS shipping. PP address is : [email protected]. Be sure to include a note with you payment specifying what you are buying and include your mailing address in the note. It will get packed up and shipped out the next day.

Thanks AGAIN !

Steve
 
Last edited:
Are there much difference in sizes in these speaker grills, and are they all produced in the same form style, i.e. grill going round the edges?

I'm only asking as I have a Williams Defender cab I've started getting sorted and I'm looking to repo the speaker grill as well, only I'm in Ireland and shipping is a pain in the rear end. I've been hunting for a suitable grill mesh, but the ones I'm looking at seem to be expensive.

Edit:
Just seen the sizes posted way back in March 2014
7 1/2" x 24 3/8" 3/4" bend (Robotron & Joust)
7 1/2" x 22 7/8" 3/4" bend (Moon Patrol, Sinistar, Bubbles)
9 5/8" x 24 3/8" 3/4" bend (Defender)​
Hi Infurious,

If you want me to get a shipping quote to you please forward your mailing address, phone number and the quantity / sizes of grills you need.

Thanks

Steve
[email protected]
 
Thanks for all the orders and inquiries about my speaker grills. At this time, I am SOLD OUT of medium sized grills that are used on Robotron, Joust, Stargate and Varkon. This size grills can still be bought from Arcade Shop - who does have a limited stock - don't wait if you need one!

Currently, you can purchase grills directly from me for the following titles:

Defender
Moon Patrol
Sinistar
Bubbles

You can PP $45 (friends and family or cover the fee) + $25 for CONUS shipping. PP address is : [email protected]. Be sure to include a note with you payment specifying what you are buying and include your mailing address in the note. It will get packed up and shipped out the next day.

Thanks AGAIN !

Steve
 
Back
Top Bottom