Reproduction Lunar Lander CP and Main Wire Harness

djw90

Well-known member

Donor 2011
Joined
May 14, 2008
Messages
13,112
Reaction score
112
Location
spokane, Washington
With the Lunar lander control panels, and other Lander parts now being reproducted.. Just wanted to see what kind of interest there would be in reproduction Lunar lander control panel, and main harnesses.. I have needed 2 of each for my other Lunar Landers for a long time now.

Might be time to start building harnesses.. :)

Dont have a price yet need to source the parts and wire...

Does anyone know a good place to buy wire in bulk.. I want all the wiring to match the original colors..
 
Last edited:
I could use a CP harness only please (EDIT: And Main pls)

I was going to map this out like the Star wars harness thread, but I would be happy to sit back at watch instead.

Hope you get a few guys interested Dan, are you looking to do it, or get someone to do it?
 
Last edited:
I could use an original CP harness only please

I was going to map this out like the Star wars harness thread, but I would be happy to sit back at watch instead.

Hope you get a few guys interested Dan, are you looking to do it, or get someone to do it?

I sent a Cp harness and a main harness to Seattle for repairs.. I
really hope I can get them back repaired:)

That way I could have a template without pulling the harness from my working machine.. Would love to have a map like you did for star wars:D

If there is enough interest would like to run these..
 
Last edited:
I sent a Cp harness and a main harness to Seattle for repairs.. I
really hope I can get them back repaired:)

That way I could have a template without pulling the harness from my working machine.. Would love to have a map like you did for star wars:D

If there is enough interest would like to run these..

Ok, I have a real schematic (Hardcopy) I will see what I can do
 
With the Lunar lander control panels, and other Lander parts now being reproducted.. Just wanted to see what kind of interest there would be in reproduction Lunar lander control panel, and main harnesses.. I have needed 2 of each for my other Lunar Landers for a long time now.

Might be time to start building harnesses.. :)

Dont have a price yet need to source the parts and wire...

Does anyone know a good place to buy wire in bulk.. I want all the wiring to match the original colors..

QTY 23 http://www.mouser.com/ProductDetail...GAEpiMZZMvz8LftK4jerl6AgDod%2boiBfWQyV7TbA10=

QTY 1 http://www.mouser.com/ProductDetail/Molex/09-50-7071/?qs=TEDqGy%2b/3mEPiiLgEaCzZg==

QTY 1 http://www.mouser.com/ProductDetail/Molex/03-06-2242/?qs=4l18HjQZIn%2bixExNzFZ2%2bw==

QTY 16 http://www.mouser.com/ProductDetail/Molex/02-06-2103/?qs=clwyIdmhKqXyNQ5/p50i5g==

Total per cp http://www.mouser.com/Cart/Cart.aspx
 
Dan, I own a NON Atari LL, it's made by LAI. (Well actually even worse it's a repro / custom / converted asteroids)

So I will need details to get this drawn up please.

Pics, plug close-ups, and what they do if poss, plug numbers if known, pin polarity (Male / female)

A little bit at a time will do, are you able to assist? :) Or other LL owners?
 
Lunar Lander Control Panel Harness (Prototype)

None of the colors match because it is a prototype.

View attachment 98249

Now thats Purty:D I just sent you a PM Dave.. I have found some of the parts cheaper, but not much.. What are the odds of getting that prototype mailed to me:) Dont really want to take apart my original to measure..
 
Thanks Dok

How do you go crimping them tiny pins Dave?
I tried a while back when doing my LL Harness, and gave up after wasting about 20 pins
Maybe I had the wrong crimper, but it seemed to fit

PRACTICE:cool:

Need to have enough interest for at least 20 Control Panel harnesses. These are not cheap to make, and use 16 different color wires. Best cost if 20 are made is $30 shipped in the lower 48.

So, make a list if you want it to happen.;)
 
PRACTICE:cool:

Need to have enough interest for at least 20 Control Panel harnesses. These are not cheap to make, and use 16 different color wires. Best cost if 20 are made is $30 shipped in the lower 48.

So, make a list if you want it to happen.;)



Awesome Lets start the list for the CP harnesses:D

Im in for 2 (Serial #1 and #2 please..):)
 
Back
Top Bottom