Reproduction Logo/Assault/HallEffect/Xybots Controller Actuator Ball by RAM Controls

Status
Not open for further replies.

Daviea

Permanently Banned - See: Ram Controls Forum Secti
Joined
Jul 18, 2006
Messages
958
Reaction score
8
Location
Huntington Beach, California
Rating - 85.4%
82   14   0
Reproduction Logo/Assault/HallEffect/Xybots Controller Actuator Ball by RAM Controls

Yeah, I've been busy this last week!!! I decided to focus on getting a few parts completed this week and I have some results to share.

Next item on the list: Logo Stick Actuator Balls

This is white delrin part replaces Atari part number 040693-01 which was originally made from natural nylon plastic. No doubt, you've seen the OEM plastic parts cracked and broken. You won't have that problem with these parts as they are made from material which will outlast the OEM counterparts many times over.

These will work on the Atari Logo sticks (Gauntlet, etc), Atari Hall Effect sticks (I, Robot, Escape from the Planet of the Robot Monsters, Roadrunner), Assault sticks, Xybot sticks, Peter Pack Rat sticks, etc.

Check 'em out:

DSC09751.JPG

Semi close-up photo of the parts. These are essentially identical to the original Atari part, but made from an upgraded DELRIN material. They should outlast the OEM version by a long, long time!!


DSC09752.JPG

Here's another photo of the same parts. These are precision machined - same quality as my other parts.


DSC09750.JPG

Gratuitous photo to demonstrate I have some QTY on hand, ready to ship!

So, these are available now @ $10ea, shipped. Enjoy!! Watch for my next few posts about the other parts I just finished making.
 
I'm really not too far off from being able to assemble brand new Logo controller based joysticks. Just a few more key pieces and I'm there. I've been slacking off on this project because it seems that the interest level has died off. But, I am still working on it slowly. I'll get there.
 
Status
Not open for further replies.
Back
Top Bottom