DPtwiz
Well-known member
- Joined
- Nov 2, 2006
- Messages
- 8,099
- Reaction score
- 621
Reproduction Black Widow cabinet w/art + T-molding Ohio
Reproduction cnc cut black widow cabinet, has new leg levelers, DJW90's Artwork, original Atari wheels, and new smooth T-molding. Cabinet is in Ohio, 700.00 picked up. If it needs shipped, you arrange shipping, pallet and wrap is an extra 50.00 I did notice you can't measure the art placement off a Gravitar. I think i'm about a quarter inch low, as the Key marks are slightly visible at the top. Not very noticeable once i installed T-molding.
There is one small scratch in the inside black, right next to the marqee. Was about 3/16" X 3/16" i covered it with a small piece of black vinyl. Once the marquee is installed, it should be completely covered and a non issue. Back door and removable speaker/light fixture panel are both included, just not pictured. This is pretty much ready to drop in your parts and have a mint game. I did offer this to Roadrunner000 first, so i have to hear back from him on it. thanks, Brett
Reproduction cnc cut black widow cabinet, has new leg levelers, DJW90's Artwork, original Atari wheels, and new smooth T-molding. Cabinet is in Ohio, 700.00 picked up. If it needs shipped, you arrange shipping, pallet and wrap is an extra 50.00 I did notice you can't measure the art placement off a Gravitar. I think i'm about a quarter inch low, as the Key marks are slightly visible at the top. Not very noticeable once i installed T-molding.
There is one small scratch in the inside black, right next to the marqee. Was about 3/16" X 3/16" i covered it with a small piece of black vinyl. Once the marquee is installed, it should be completely covered and a non issue. Back door and removable speaker/light fixture panel are both included, just not pictured. This is pretty much ready to drop in your parts and have a mint game. I did offer this to Roadrunner000 first, so i have to hear back from him on it. thanks, Brett
