FS Parts: Reproduced Vs. Dr. Mario Daughter Card- Any Interest?

eaconner

Member
Joined
Apr 13, 2010
Messages
196
Reaction score
0
Location
Charleston, West Virginia
Rating - 100%
7   0   0
Reproduced Vs. Dr. Mario Daughter Card- Any Interest?

Hey guys, I have come across a small supply of Nintendo MMC1B2 chips that are used on the Vs. Dr. Mario Daughter Card. If there is enough interest I will repro the daughter board, I would like to have about 10 orders. The price per board will be $75 shipped.

I am in the process of acquiring all of the parts and completing the board design. I hope to have everything completed by August.

This would not include the ROMs, PPU, or CPU.

It uses a RP2C04-0003 PPU from the following games:
Vs. Excite Bike
Vs. Goonies
Vs. Balloon Fight
Vs. Soccer
Vs. TKO Boxing

1. qbass187
2. crassvw
3. patchboston
4.
5.
6.
7.
8.
9.
10.

Let me know what you think.
 
Last edited:
If that is true you should work on using the RP2C04-0001 PPU since it seems to be the most common. Might help sales. Go Dr. Mario!
 
If that is true you should work on using the RP2C04-0001 PPU since it seems to be the most common. Might help sales. Go Dr. Mario!

+1, if that was possible, I would prob get a few more as I have about 4 extra of the 0001 ppu thanks to Hogans Alley
 
Ok, the final price will be $75.00 shipped and does not include the ROMs, PPU, or CPU to keep things legal.

As for the RP2C04-0001 PPU swap, If it works with the original board it will work with this one.

-Eric
 
if you can get a few more over the 10 needed, and the price drops a bit, I will strongly consider 2 more ;)
just keep me updated!
 
Last edited:
side note: is there a way/have you tried, to make a daughter card that you can insert the roms, lets say smb, ppu and cpu on, and it makes for easy install/removal? That would be sweet, save time swapping games, and reduce the chance of bending/breaking legs.

IF that was possible, I know I would take as many as I had games for!
 
Eaconner has not been on since oct of 2012. I have these mostly drawn up and have all the components to make them, I have but I have been busy with work and school. I plan on finishing these this summer along with my other projects that I have had on the back burner. The universal PPU should be completed by them as well so that could be used as well.

-Jake
 
side note: is there a way/have you tried, to make a daughter card that you can insert the roms, lets say smb, ppu and cpu on, and it makes for easy install/removal? That would be sweet, save time swapping games, and reduce the chance of bending/breaking legs.

IF that was possible, I know I would take as many as I had games for!


I could do a ZIF(zero insertion force) socket for an extra cost.

-Jake
 
Back
Top Bottom