Repro DK, DKjr, DK3 Series wiring harness

Dokert

Well-known member
Joined
Jun 3, 2007
Messages
12,751
Reaction score
141
Location
Arlington, Washington
Rating - 100%
85   0   0
This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking pre-orders now. They will take approximately 2 weeks to build upon receipt of parts and wire. We will NOT order anything until we have at least 10 paid pre-orders. This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

We will post pics of the prototype when it is complete in a few days.

The first run of 20 will NOT have switching power supply support. It may become available at a later date for an additional $10 shipped in the U.S. and $17.50 shipped to Canada, UK or Australia.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia.

Please make sure that I have the following:
1. Your address

2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]
 
This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) [Just to be clear...
The harness will have the standard connectors for DK and DKjr. You would need the repro cp harness only if you have the funky DK3 cp harness connector.]
These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking pre-orders now. They will take approximately 2 weeks to build upon receipt of parts and wire. We will NOT order anything until we have at least 10 paid pre-orders. This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

We will post pics of the prototype when it is complete in a few days.

The first run of 20 will NOT have switching power supply support. It may become available at a later date for an additional $10 shipped in the U.S. and $17.50 shipped to Canada, UK or Australia.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia.

Please make sure that I have the following:
1. Your address
2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]

The Official List:
Krajkerjac (x2) (PD)
Arcadeannex (PD)
Arcadenut (PD)
Metahugh (PD)
Anonymous (PD) (extra rainbow cable PD)
 
Last edited:
wow why only 20 thats seems like a realy small number?

I belive i have the funds here but there not in the bank for 2 of them. But i'm guessing your only wanting paypal payment.
 
wow why only 20 thats seems like a realy small number?

The cost outlay on this harness is very large, and I have no desire to have a bunch of them sitting on my shelf. The connectors for other games cost a lot less and can be used in several different games.

I belive i have the funds here but there not in the bank for 2 of them. But i'm guessing your only wanting paypal payment.

Paypal is my preferred method of payment if someone is not handing over cold hard cash in person.
 
Prototype pics posted in the general forum. Questions have been raised about the DK3 compatability.

DK3 will work the purchase of the control panel harness. The original molex style connectors found on a DK3 control panel are not available.

If you plan to use this in a DK3 just add $10.00 to your order and specify you want a contol panel harness as well.

For that matter if your DK or DKjr CP harness is hacked, add $10.00 and get a new CP harness.

- Barry
 
The "Rainbow Cable" is included in the price and comes with the harness.

Extra "Rainbow Cables" are an addition $5.50
 
Last edited:
This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) [Just to be clear...
The harness will have the standard connectors for DK and DKjr. You would need the repro cp harness only if you have the funky DK3 cp harness connector.]
These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking pre-orders now. They will take approximately 2 weeks to build upon receipt of parts and wire. We will NOT order anything until we have at least 10 paid pre-orders. This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

We will post pics of the prototype when it is complete in a few days.

The first run of 20 will NOT have switching power supply support. It may become available at a later date for an additional $10 shipped in the U.S. and $17.50 shipped to Canada, UK or Australia.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia.

The Rainbow Cable comes with the harness. Additional Rainbow Cables are an additional $5.50 each.

Please make sure that I have the following:
1. Your address
2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]

The Official List:
Krajkerjac (x2) (PD)
Arcadeannex (PD)
Arcadenut (PD)
Metahugh (PD)
Anonymous (PD) (extra rainbow cable PD)
Jpopson (x2)
Patchboston (PD)
 
Last edited:
I'm not an expert on wiring harnesses, so please excuse me if I ask a stupid question.

I have a DK Jr upright cabinet, and I also have a DK3 board that I've never used. If I rewired my cabinet with the $55 set you're selling here would that allow me to hook up either board by switching the edge connectors?
 
I'm not an expert on wiring harnesses, so please excuse me if I ask a stupid question.

I have a DK Jr upright cabinet, and I also have a DK3 board that I've never used. If I rewired my cabinet with the $55 set you're selling here would that allow me to hook up either board by switching the edge connectors?

Yes that is exactly what you would do. Just swap the edge connector from one boardset to the other boardset and you are all done.
 
Back
Top Bottom