Repro (Atari) serial stickers

[etienneodk]

All PM's are send, some people have responded and payed.

The people that have payed can expect they're stickers soon, since this night i packed them into "cardboard rugged envelopes".

I have added some labels with "fragile/do not bend" and i have sticked them with a little piece of masking tape on a piece of paper so they stay away from the edges of the envelope to prevent damage.

Be carefull when you take them out so you don't wrinkle them when removing from the "support paper"

I'll drop them in the mail tomorow.

Finally i see the profit of my Dymo ;D

If you have questions, please PM me..

 

[etienneodk]

I have a few leftovers:

4x #11 and 4 sets of Jamma pinout stickers (for on the edge connector)

 

[bungy]

I wish I had gotten in on this. Those stickers look very nice. If you ever run them again, count me in.

 

[cleverlyj]

i'll post a pic later, but i got my sticker weds? (i think) and it looks awesome. thanks etienne!

 

[etienneodk]

Happy you like them

I can start to collect again untill i got a full sheet.

if there is enough demand to fill a sheet i can have it print again.

The sheets are 100x70 cm. so i think 75 stickers will fit.

Just let me know what you will like and how many.

 

[Phetishboy]

Thanks for the reminder. I went to pay almost 2 weeks ago and the Internet went down for a while at work. When it came back I had forgotten all about it. Payment on the way.

 

[cnlmoore]

I got mine super fast and they look great. Can't wait to put them on my cabaret project.

 

[techron]

when will you run another batch of these?

 

[etienneodk]

I will start to collect again from stickers that people have interest for.

I will open a new topic for the 2e run, and keep track of the orders.

New topic:

http://forums.arcade-museum.com/showthread.php?t=208817

 

[Zinfer]

Nicely done with a good printers office.
I was kind of hoping someone else would take over the decal printing.
Those that I'd made a run of, my printers couldn't do foil, required a screenprinter.
With maintaining a stock it kind of ruled out screenprinting, so I came as close as I could.
I was considering expanding on cabinet decals as I came across new projects, however - it became a real pain with shipping and taking orders and still try and enjoy the collecting/restoration hobby.
So I guess my question is, are you going to make this a long-term endeavor or was this just a one-off?
I've always had a good experience with selling these decals to collectors, but I guess I could use someone else to handle the business side of it as I'm terrible at that.
I'm approaching needing to make another run of the serial labels as I'm running low on stock (the foil type). I was going to attempt to find someone that could do foil screenprinting and check out their pricing, but if your going to start running these then I'll just sell off what I have left.
Thanks everybody for your orders. Looks like this area is starting to develop along at long last.

 

[etienneodk]

I have made a template which you can print and use as a guide for cutting and positioning typing.

The Irish version #2:
www.opdenkelder.com/pics/alusticker/02template.pdf

The USA version #4:
www.opdenkelder.com/pics/alusticker/04template.pdf

About the future, i started this because i had a question of a good friend (Level42) and i also could use some myself.

As time past there was more interest, so i started to investigate the posibilities of material and found a source that could deliver me sheets of 100 x 70 cm.

I do some more artwork vectoring and printing just for hobby so i am not in any kind of business with this.
its all on non profit base, since i already have a regular job, and dont want to have the deadlines etc. etc.

But when this was such a big succes, and there where people that missed the run, i decided to collect new orders, and when the counter hits 70 for the serial plates, or the sheet is full with other decals that also need to go on aluminium stickers, i'll send it of to the printer and let them print it.

it could be that the second run is the last, depending on the interest.
If there is again after this a full sheet of orders, i can do it again.

Its too expensive for me to get a stock of stickers, so i only have them print on order to help the comunity and again, i do it for fun, and not as a business.

You may take a look here (where i hang out the most) to get an idea:
http://www.dragonslairfans.com/smfor/index.php?board=15.0
Etienne

 

[Jr. Pac]

Are these still availible? I would like a #10.