Replacing whirlwind spinner decals

Considering the disks are easy to remove I HIGHLY suggest it. Then take a blow dryer after them, it'll help loosen the adhesive. PLUS it's easier to gauge how to center the decal. Believe me when I say, you'll get irritated watching those decals spin if they're not centered.
 
this ended up being super easy. each spinner has a screw in the center. The screw is set down just a bit. I pierced the center with an exacto and then gently cut a straight line from center to edge. Then pulled it up one half at a time. Came right up. didnt even need a hair dryer.
 
I thought they were painted. Didn't even realize they were stickers. :confused2: I put the new stickers over the old ones and haven't had any problems. I would have removed the old ones had I known though.

Jeff
 
Back
Top Bottom