Replacing WG4900 Neckboard

D_Harris

Well-known member
Joined
Jan 27, 2008
Messages
2,518
Reaction score
51
Location
Staten Island, New York
I'm about to replace a broken WG4900 neck board and just wanted to ask what is the best way to disconnect the thick white wire that runs from the chassis what-cha-ma-cal-lit and plugs into the white thing-a-ma-jig on the neck board. :)

(See pic).

Thanks.

Darren Harris
Staten Island, New York.
 

Attachments

  • WG49XX Neck board.JPG
    WG49XX Neck board.JPG
    48.4 KB · Views: 27
Squeeze the white cover on the neckboard and it comes right off. You will then need to desolder the wire from the neck socket.
 
Squeeze the white cover on the neckboard and it comes right off. You will then need to desolder the wire from the neck socket.

Squeezing doesn't do anything. I guess I'll have to try to pry it off with a screw driver.

Thanks.

Darren Harris
Staten Island, New York.
 
Back
Top Bottom