Replacement for R811 Resistor on Wells K7400

the schematics i read from the wells site say 75k (1/2 watt) resistor.

do you have a grey screen by chance, with almost no color signal output??

that is what i have on mine and hoping the resister change fixes it.

Peace
Buffett
 
the schematics i read from the wells site say 75k (1/2 watt) resistor.

do you have a grey screen by chance, with almost no color signal output??

that is what i have on mine and hoping the resister change fixes it.

Peace
Buffett

Yep, that's the problem I'm having. Had color (with stretched out and fuzzy images) before I did a full cap kit, but after the cap kit, I have the grey screen -- even though the picture is now sharp and proportioned correctly. (see attached pics)

I found a few old mentions from Ken Layton (here on KLoV) that the resistor is a half-watt, 100k resistor, so that's what I installed. It made ZERO difference in the picture quality.
 

Attachments

  • SAM_3270.jpg
    SAM_3270.jpg
    74.4 KB · Views: 28
  • SAM_3271.jpg
    SAM_3271.jpg
    93.3 KB · Views: 22
Last edited:
Back
Top Bottom