replacement chassis - can I do this?

mustang_5l

Member
Joined
Jun 17, 2012
Messages
293
Reaction score
3
Location
Surrey, BC, Canada
I have a monitor that came with a G19-CAO chassis (as marked on the side). The monitor itself is sitting in a frame that has a G07-CBO decal stuck on it. I'm wondering if I can just install a spare G07 chassis in its place. I've never come across the G19 before and the G07 neck board seems to look the same. Info is impossible to find on the G19's
Anyone know?
 
you need to ohm out the yoke to see if it will work. go7's have high vertical ohms of about 55 and horizontal of 2.5. these readings have to be close to even try.
 
Back
Top Bottom