removing a working touchscreen from a tube

mudhens1

Active member
Joined
Oct 30, 2006
Messages
1,455
Reaction score
15
Location
chillicothe, Ohio
i bought a working 19" vga monitor with a working touchscreen...i need to separate them for 2 different projects...any advice on how to do this and not damage the touchscreen?
 
I used to use an exacto knife on the double stick after removing the tape thats wrapped around the outside of the touch screen. The touch screen surface is actually on the front of the glass so theres nothing to damage other then wires on the backside of the glass.
 
Back
Top Bottom