RedBox 450 in 1/LCD?

iyouwas

Member
Joined
Nov 28, 2010
Messages
925
Reaction score
3
Location
Pittsburgh, Pennsylvania
I plan on hooking up a RedBox 450 in 1 with an 19 inch LCD.
My crt is dying, and figured id go with a lcd.

I am aware that the output on the redbox is cga, and bought a converter to convert cga to vga.

Has anyone done this?
Just checking in with you all, before I go any further.
Thanks!

Tom
 
Last edited:
Well, I hooked up the converter, and tested it on a jamma board I had here, and it worked perfect!
But when I hooked up the GameBox, it couldn't seem to configure itself. Tried auto align on the connverter and monitor but had no luck. All I can think is, the wires in the molex connector must be in the wrong location, or its a different signal coming out of the GameBox.

Any ideas?
Thanks!
 
Back
Top Bottom