dkblue
Member
Gone!
I have a red tent project I'm looking to get rid of. I'll describe it the best I can but let me know if you have any specific questions.
This is definitely a project and has been partially disassembled. Both sides will need paint since one is painted blue and the other has been hit with primer.
Someone converted it to jamma in the past, so there is a switching power supply in place of the nintendo ps. The actual isolation transformer (I believe it is) is there however.
What is included:
-2 monitors: I know one needs a new flyback at least and the other needs to be hooked up to a rejuvenator to see if the tube can be saved.
-Glass and cardboard surround for the monitors. I might even have the tinted bezels to go with it (I'll have to check).
-Control panels: Both have an extra button hole drilled, so those will need to be replaced unless you're looking to mame/multi it.
-All joysticks with control panel harness
-Also included will be a vs board with no cpu, roms or ppu.
What's missing:
-Missing bolts to hold the red tent in a raised position.
-Missing at least 1 piece of plexi for the instruction cards.
-Missing part of the internal workings of the coin mechs.
-Missing all the locks.
-There are a few buttons on the panels but non of them are Nintendo buttons.
Basically what you seen in the pictures is what you get. Pictures are now at: http://s1270.beta.photobucket.com/user/adhicks1/library/Red Tent Project
I'm looking to get $200 for everything or $150 for everything minus the VS board. Let me know if you have any questions or would like to come look at it. Pickup only please.
Thanks...
I have a red tent project I'm looking to get rid of. I'll describe it the best I can but let me know if you have any specific questions.
This is definitely a project and has been partially disassembled. Both sides will need paint since one is painted blue and the other has been hit with primer.
Someone converted it to jamma in the past, so there is a switching power supply in place of the nintendo ps. The actual isolation transformer (I believe it is) is there however.
What is included:
-2 monitors: I know one needs a new flyback at least and the other needs to be hooked up to a rejuvenator to see if the tube can be saved.
-Glass and cardboard surround for the monitors. I might even have the tinted bezels to go with it (I'll have to check).
-Control panels: Both have an extra button hole drilled, so those will need to be replaced unless you're looking to mame/multi it.
-All joysticks with control panel harness
-Also included will be a vs board with no cpu, roms or ppu.
What's missing:
-Missing bolts to hold the red tent in a raised position.
-Missing at least 1 piece of plexi for the instruction cards.
-Missing part of the internal workings of the coin mechs.
-Missing all the locks.
-There are a few buttons on the panels but non of them are Nintendo buttons.
Basically what you seen in the pictures is what you get. Pictures are now at: http://s1270.beta.photobucket.com/user/adhicks1/library/Red Tent Project
I'm looking to get $200 for everything or $150 for everything minus the VS board. Let me know if you have any questions or would like to come look at it. Pickup only please.
Thanks...
Attachments
Last edited:
