Red Baron cockpit Help Needed

2Vizslas

Active member
Joined
Jun 30, 2016
Messages
287
Reaction score
129
Location
CANNON FALLS, Minnesota
I am trying to find out what type of screw was used to install the plexiglass window. Size and if there was a rubber grommet that goes between the screw head and plexiglass . Also the hole size in the plexiglass for the screws. My cockpit was missing the plexiglass window so I don't have any hardware to compare with. Thanks
@VectorCollector
 
Last edited:
I am trying to find out what type of screw was used to install the plexiglass window. Size and if there was a rubber grommet that goes between the screw head and plexiglass . Also the hole size in the plexiglass for the screws. My cockpit was missing the plexiglass window so I don't have any hardware to compare with. Thanks
You might want to visit the game listing in VAPs and ping people who own the cockpit version.

Like @2Vizslas (put an ampersand sign in front of the op's name if they have one) so they will see this (like you did)
 
I don't have a RB Cockpit...

My experience with Atari Cabinets is that any small screw that goes into a t-nut is a 10-32 Machine Screw, Usually Security Button head Cap screws.

Any woodscrew type will be a #8 Square drive ,washer base head with a high-flight thread.

the attached photo is similar

IMG_0094.jpg
 
Back
Top Bottom