Reconstructing Bride of Pinbot...Where do these go??

TheDrewster

Well-known member

Donor 2012
Joined
Oct 5, 2008
Messages
7,668
Reaction score
314
Location
Reno, Nevada
Reconstructing Bride of Pinbot...Where do these go??

When I bought my BOP, the playfield had already been half disassembled. I have been able to reconstruct most everything except these two parts. Where do they go?? One is obviously a ball gate, and the other one looks like a spring-loaded armature. ImageUploadedByTapatalk1349354999.922773.jpg
 
Spring loaded one might be the gate that leads from the head to the mini PF, but there should be a coil and the solid metal flap isnt there. The wire gate might be the oneway gate that is at the bottom of the path from the pops to the PF. the low and would go on the left.
 
Spring loaded one might be the gate that leads from the head to the mini PF, but there should be a coil and the solid metal flap isnt there. The wire gate might be the oneway gate that is at the bottom of the path from the pops to the PF. the low and would go on the left.

Got it, thanks! Shoot, that coil is gonna be a bitch to find...I wish this game didnt have so many unique parts. Ugh.
 
just so you know the dip in the gate goes towards the middle of the playfield (left side). it keeps the ball from draining when it comes out of the pops. I owned mine for 10 years of severe drains till I saw another with the gate. I bent some piano wire and a thin strip of metal to make my own.
 
Back
Top Bottom