Recommend "odds and ends" Service Parts to pad another order?

[SCUBA King]

So I am putting in yet another order to @security0001 as I always seem to need a couple more things since my last order.

I wanted to see if anyone can recommend any additional odds and ends that I may want to keep around that I can add to this order as I "need" about $12 worth of stuff that I forgot to order for my current repairs, and with shipping being another $10+ I wanted to see if anyone has any recommends to add this time around.

I have midway and atari cabinets, mostly G07 so I have built up my odds and ends inventory a bit on these, but would love any input on anything else that I am sure I will end up needing soon.

Thanks!

 

[DMGambone]

Molex pins (male/female) of various sizes, stranded wiring, fuses

 

[VidyaGamez]

Sockets, fuses, molex pins (0.156 and 0.093), wiring, cable wire clamps/zip ties, silicone/mica insulators for various transistors, monitor adjustment tools, PCB mounting feet

 

[DMGambone]

If you get the molex pins, get the pack of loose pins. So much better than snipping them.

 

[rydin4life]

hahaha...it's like I made this post myself!!!!!

I put together another order just today and added some female quick disconnects just to pad the order. You'd think I ran an arcade with how much miscellaneous stuff I buy, but I have a drawer full of fuses, molex connectors and pins, amp connectors and pins, an EMI filter, caps, pots, wire, etc....hell each of my machines has a spare cap kit and filter cap in the coin bucket....

 

[SCUBA King]

If you get the molex pins, get the pack of loose pins. So much better than snipping them.

learned that one already.

 

[SCUBA King]

hahaha...it's like I made this post myself!!!!!

I put together another order just today and added some female quick disconnects just to pad the order. You'd think I ran an arcade with how much miscellaneous stuff I buy, but I have a drawer full of fuses, molex connectors and pins, amp connectors and pins, an EMI filter, caps, pots, wire, etc....hell each of my machines has a spare cap kit and filter cap in the coin bucket....

Wait, that bucket behind the coin mech is for coins? I have been keeping spare cap kits in there the whole time too!

 

[VidyaGamez]

learned that one already.

I had to buy the uncut edge connector style pins from them because it was all they had. Not very fun

 

[parism]

So very true....