RGB
New member
Reco PCB - a JAMMA button remapping and autofire device
Reco PCB is a microcontroller based device that allows you to change the button layout in your arcade cabinet (or supergun's joypad/arcade stick) on-the-fly. It also has a fully configurable autofire feature for every button.
Reco PCB plugs between a JAMMA PCB game and an arcade cabinet's/supergun's JAMMA harness. By pressing a combination of buttons, you can access the "configuration mode" which allows you to remap the buttons, enable autofire and access the PCB game's test/service modes.
The thread with full specs is here
Pricing:
Please read before you buy:
1. The boards are assembled by me and I need around a week of lead time to put them together. If I get many orders, there may be a slight delay, too, please remember about this when buying.
2. I assemble boards only when I get an order.
3. You will have to specify if you want the version with the connectors or screw terminals.
4. Each PCB will be safely packed in a box and put in an antistatic bag.
5. Payment via paypal, gift or add 4%.
6. Shipping via Registered Priority Mail to anywhere in the world - 7 EUR
PS I know I have practically no posts and zero feedback here, but I have 89 positive feedbacks (only positive) over at shmupsforum.
Cheers,
RGB
Reco PCB is a microcontroller based device that allows you to change the button layout in your arcade cabinet (or supergun's joypad/arcade stick) on-the-fly. It also has a fully configurable autofire feature for every button.
Reco PCB plugs between a JAMMA PCB game and an arcade cabinet's/supergun's JAMMA harness. By pressing a combination of buttons, you can access the "configuration mode" which allows you to remap the buttons, enable autofire and access the PCB game's test/service modes.
The thread with full specs is here
Pricing:
- Reco PCB - 50 EUR
- CPS2 kick harness, 25cm long - 7 EUR
http://farm6.staticflickr.com/5329/8945837235_24cb8d08e3_c.jpg
- 6 pin harness that connects arcade cabinet's P1&2 buttons 4, 5, 6 with the Reco PCB; 100cm long and ends with quick disconnects - 5 EUR
- 6 pin harness that connects arcade cabinet's P1&2 buttons 4, 5, 6 with the Reco PCB; 100cm long. This one has ends with both male and female quick disconnects - 7 EUR
http://farm4.staticflickr.com/3752/8946391840_bcdafcbe41_c.jpg
- external LED cable -> to follow
Please read before you buy:
1. The boards are assembled by me and I need around a week of lead time to put them together. If I get many orders, there may be a slight delay, too, please remember about this when buying.
2. I assemble boards only when I get an order.
3. You will have to specify if you want the version with the connectors or screw terminals.
4. Each PCB will be safely packed in a box and put in an antistatic bag.
5. Payment via paypal, gift or add 4%.
6. Shipping via Registered Priority Mail to anywhere in the world - 7 EUR
PS I know I have practically no posts and zero feedback here, but I have 89 positive feedbacks (only positive) over at shmupsforum.
Cheers,
RGB
Last edited:
