ballytablewiz
Well-known member
Sanyo 20EZ Chassis
Fully recapped with Bob's deluxe kit, completely cleaned and detailed, and 9 stitches have been applied (please read below for details). Just finished a 6-hour burn-in. B+ reset and holding a rock steady 108.0V.
$100 SHIPPED! *SOLD*
This chassis has been extensively reworked. It was received with a large crack in the flyback area, a small crack elsewhere, a snapped in half neckboard, a torn anode boot, and a broken width coil. I applied the 9 stitches to the mainboard as needed, swapped in a donor flyback, width coil, and neckboard, and did a full recap. Functionality has been 100% restored and the cracked areas are now stronger than OEM thanks to the heavy stitches. This chassis has the optional lead for inverters.
Fully recapped with Bob's deluxe kit, completely cleaned and detailed, and 9 stitches have been applied (please read below for details). Just finished a 6-hour burn-in. B+ reset and holding a rock steady 108.0V.
This chassis has been extensively reworked. It was received with a large crack in the flyback area, a small crack elsewhere, a snapped in half neckboard, a torn anode boot, and a broken width coil. I applied the 9 stitches to the mainboard as needed, swapped in a donor flyback, width coil, and neckboard, and did a full recap. Functionality has been 100% restored and the cracked areas are now stronger than OEM thanks to the heavy stitches. This chassis has the optional lead for inverters.
Attachments
Last edited:

