SOLD - PARTS Rebuilt deflection boards for 15"/19" B&W vector monitors w/warranty - $165 shipped, $125 for trade-in

ElRamos

Member
Joined
Jan 8, 2018
Messages
55
Reaction score
58
Rating - 100%
1   0   0
BDCAE02C-BA24-4177-B0C4-A69BCE5E92D6.jpeg
Here for sale are rebuilt and fully working deflection boards for the Electrohome G05-802/805 and Wells-Gardner 15V2000/19V2000 series of black-and-white vector monitors. I accumulated these over years of collecting and recently went through them, rebuilding each as needed to get them working 100% long-term. All have new 105ºC capacitors installed, and resistors R100 and R101 have been replaced with lengths of wire per service bulletins issued after manufacture.

The Electrohome deflection boards will have pins 4 and 5 pulled from connector P500 to be compatible with both of the different wiring harnesses used on these monitors. Resistors installed are for the more common 19" monitor but I can replace them with the different value resistors for the 15" monitor by request. Wells-Gardner deflection boards work in both the 15" and 19" monitors as-is. Electrohome boards do not work in place of Wells-Gardner boards or vice versa, so make sure the board you're buying matches the one you're replacing!

Before installing, buyers must verify that the frame-mounted transistors on their monitor are good and their game board is outputting valid X-Y signals to avoid potentially damaging the deflection board. This is easily done with any digital multimeter by following andrewb's 6100 installation guide. Instructions are for a color vector monitor but apply to B&W vector monitors with the only difference being one less pair of transistors to test.

I'll warranty each of these boards for one year from time of sale; If there is any problem within that time, ship back to me and I'll repair and ship back free of charge.

I accept PayPal and Venmo. Prices are the same as andrewb's boards in respect of his existing sale posts. Being on the west coast, I figure buyers can choose whoever's closest to reduce shipping time. Cost goes down to $125 on receipt of a *complete* trade-in board of either type, similar to his sale.

Questions and feedback welcome. I hope this helps collectors keep more of those vintage vectors alive!
 
Last edited:
Back
Top Bottom