Reactor PCB question

komodo

Well-known member

Donor 2019, 2021
Joined
Apr 25, 2007
Messages
5,011
Reaction score
101
Location
Flower Mound, Texas
From what I can find, Reactor came out on a GG2 boardset whereas Qbert came out on GG3. However, apparently an early model Qbert harness will work with slight modifications to become a Reactor.

Now the million dollar question. (Actually 2) Can Reactor be made to run on Qbert hardware? (Yes I know the sound boards are the same)

Question number 2.....how do you know what an early Qbert harness looks like?
 
From what I can find, Reactor came out on a GG2 boardset whereas Qbert came out on GG3. However, apparently an early model Qbert harness will work with slight modifications to become a Reactor.

Now the million dollar question. (Actually 2) Can Reactor be made to run on Qbert hardware? (Yes I know the sound boards are the same)

Question number 2.....how do you know what an early Qbert harness looks like?

Early Qbert harness....no filter board. Wiring harness terminates at the 60-pin edge connector of the motherboard.

Late Qbert harness.....has a filter board inbetween. Wiring harness enters a filter board with a bunch of Molex .156 connectors.....then exits the filter board with a bunch of Molex .156 connectors......then travels onto the motherboard via a 60-pin edge connector.

Reactor vs Qbert.....I'm not for sure. I don't see a lot of Reactors boards. I can tell you this.....a Mach 3 board is very easy to turn into a Qbert:D.

Edward
 
Back
Top Bottom