Reactor Metal & Art Package Interest

Takeman

Well-known member
Joined
Nov 7, 2005
Messages
6,066
Reaction score
1,194
Location
Illinois
Im gauging interest in Reactor Control Panels, speaker grills & Phoenix Arcades Reactor CPO & Marquee overlays.

Heres the deal. I'll offer the speaker grills (powder coated) in pairs only for $23. The cp is powder coated black, die punched w/ studs for lights at $55. total is $78 for the pair, or you can purchase seperately. (panel or speaker grill pair)

The Phoenix Arcade art set which includes the Marquee overlay and control panel overlay is $120.

If both the metal parts and the artwork are purchased together, at the same time, a combined discount of $20 applies.

For example: both items combined equal $198. $20 discount for buying both sets = $178.
Everything will be shipped together in 1 box. So you're also saving on seperate shipping from 2 different vendors.

Shipping in USA 48 will be $18 (includes custom box)

Post up here if interested or have any questions!


Interest List
--------------------

Fizgig - 1 metal set
Fudd - panel only
Seawolf -3 metal sets
Flynn54321 - metal/art combo
Tronic - 1 metal set
vindog - 1 metal set
Mrbill08 -1 metal set
Mark hooks 1 metal set
--------------------

panel -10 / grill sets -9 / artset -1
 
Last edited:
i just need the speaker grills.....still tracking down a marquee and i already have a control panel, and i have all the art..
 
Where do we get a harness at? I need 2. Would you please stop offering all of this stuff? I'm broke.
 
Perhaps Dokert would be interested? Or convert an early Qbert harness....

I do NOT have a Reactor cp harness to use as a template.

The main Reactor harness has the same problem as the Q*Bert. (that damn 30/60 edge connector)

A good picture of the bottom of a Reactor cp would be very helpful.;)
 
I do NOT have a Reactor cp harness to use as a template.

The main Reactor harness has the same problem as the Q*Bert. (that damn 30/60 edge connector)

A good picture of the bottom of a Reactor cp would be very helpful.;)

I work all day then off to CAX. I can post a pic when I get back Monday...

No source on the edge connector huh?
 
I work all day then off to CAX. I can post a pic when I get back Monday...

No source on the edge connector huh?

No hurry, still working on Major Havoc & Quantum CP harnesses.

Can find the edge connector no problem, just can't find the pins in any material other than gold @ $0.98 per pin.
 
troy switch mine from the grills to a CP only....dns sold me a marquee that has grills and today i started working on my cp to find the below....its fixable but would be easier with a new cp.

Reactor%252520CP%252520001.jpg

Reactor%252520CP%252520002.jpg
 
I do NOT have a Reactor cp harness to use as a template.

The main Reactor harness has the same problem as the Q*Bert. (that damn 30/60 edge connector)

A good picture of the bottom of a Reactor cp would be very helpful.;)

I've got a Reactor CP harness that is mostly complete. I will gladly offer it up if that is what it takes to get a complete harness in the works. Photos coming. Camera battery was dead. Probably tomorrow.

Dokert....let me know if you need the harness in hand instead. Looks like it is missing the trackball connector.
 
I've got a Reactor CP harness that is mostly complete. I will gladly offer it up if that is what it takes to get a complete harness in the works. Photos coming. Camera battery was dead. Probably tomorrow.

Dokert....let me know if you need the harness in hand instead. Looks like it is missing the trackball connector.

Would like to see pictures of it first please.
 
troy switch mine from the grills to a CP only....dns sold me a marquee that has grills and today i started working on my cp to find the below....its fixable but would be easier with a new cp.

Ya, looks like you are missing the studs for the lights too.
 
didn't even realize i was missing the studs....only missing the cp, 1 speaker, the glass and the wood brace for the glass. i'm guess i'll buy new glass to fit and make the wood brace myself.
 
I'm in for a metal set.

Ready for Paypal yet?

Bill
 
Ok. I forgot how to upload photos or they changed the way to do it. I have some in my album which I think is sorted under my profile. Take a look there and let me know if they are indeed there. If not, you can view them here:

https://picasaweb.google.com/pdkomodo77/ReactorCp?authuser=0&feat=directlink

It is possible to make these, but you are missing the Track Ball portion of the harness from what I can see in your pics.

Cost with the TB section would be around $25 shipped, but I would have to see some serious interest because of the wire colors needed to make these.

PM me if you are interested in a Reactor Control Panel harness, so as not to hijack this thread. If I get enough interest to make 20, I will research this project.
Dok
 
Back
Top Bottom