Reactor Machine Questions...

flynn54321

Well-known member
Joined
Jan 13, 2008
Messages
6,244
Reaction score
176
Location
GREEN BAY, Wisconsin
I was just wondering if there were any Reactor owners out there that could answer a few questions for me.

First the game that I have has been converted so I am just trying to get it back to original.
When it comes to the marquee area... I have the 2 small speaker grilles - but in the middle there is just an open space (for the light to shine through).
It looks like a piece of plexi or glass fit into this rectangular space... can anyone tell me what it supposed to be? And if it IS plexi rather than glass - is it clear or white?

Also anyone know a good source for the red translucent buttons on the control panel?

Is the trackball unit the same that a centipede uses?

Thanks for anyone that can help answer some of these questions...
 
my reactor marquee is clear plexi in the middle

i bought the buttons from twistedquarter...you will have to sand them down to fit.

original trackball is a wico 2 1/4

if you need help putting it back together just pm me...mine was a converted birdie king. the ac wiring and power brick were the only original parts left on it....only thing left is the glass and bezel and to adjust the monitor..

Reactor%2520006.jpg
 
Last edited:
I have a new spare wooden speaker panel you can have.

Also wondering what color trackball you guys are going to use red/orange or white?
 
Back
Top Bottom