RCA w/ EYGO

alaird

New member
Joined
Aug 12, 2009
Messages
41
Reaction score
0
Location
Louisiana
I recently picked up a Golden Tee 99 machine that has an RCA A63ADT10X05 monitor with a EYGO printed circuit board. I am new to this but the EYGO board is cracked and broken. Does anyone know where to find replacements and what information do I need to get the correct one? I didn't see a model number on the board assembly itself.

Thanks.
 
eygo=wei-ya that means its a aftermarket chassis most likely... unless its a makvision then it came from the factory with that chassis..

is the nain board cracked or is just the neckboard cracked? if just the neckboard i might just have one here


8 liners has em: http://www.genao.com/osc/catalog/product_info.php?products_id=30

could probhably get one somewhere else too...
 
Also, repairing a cracked monitor chassis/neckboard is pretty easy - just epoxy the board back together and solder jumper wire (i.e. paper clips) across the broken traces.

-Ian
 
Considering you can order a brand new chassis from alva amusements (cheaper than 8liners) for ~$70 shipped I'd probably just go that route.
 
Back
Top Bottom