FS Parts: RARE New Old Stock classic OVERLAYS! TNT Amusements

Todd Tuckey

Well-known member

Donor 2019
Joined
Mar 22, 2008
Messages
4,944
Reaction score
618
Location
Southampton, Pennsylvania
Rating - 100%
136   0   0
RARE New Old Stock classic OVERLAYS! TNT Amusements

Bought out a defunct arcade in north Pennsylvania (you will see the arcade in episode 2 of our reality show if the show gets sold!) and I have decided to part with some of the control panel overlays if I get the right price. These were purchased YEARS ago and stored nicely too!! Obviously I have kept most of them, but these are some I feel I will not need.

These are for that collector who HAS to have an original!!!!

Galaga true 1981 overlays) $50 2 left
Pacmania $150 --one left
Pacmania side art...one left...this stored rolled, but will apply fine I believe. minor edge damage in a small area that I think will apply invisible...$50 Mappy overlay $150

Burgertime cocktail table...I have two pieces with start buttons for $50 each, and one 2nd player piece for $60

Burgertime upright - 2 available $125 each

Super Pacman upright - 1 available - $125 each

Galaga 88 overlay $150

Galaga 88 side art - 1 left--$60
I can ship rolled priority mail for $10 or less!

Email me directly for fastest response [email protected]
 

Attachments

  • Tammy 046.jpg
    Tammy 046.jpg
    95.6 KB · Views: 252
  • Tammy 047.jpg
    Tammy 047.jpg
    95.8 KB · Views: 206
  • Tammy 048.jpg
    Tammy 048.jpg
    96.4 KB · Views: 216
  • Tammy 049.jpg
    Tammy 049.jpg
    96.3 KB · Views: 193
Last edited:
Emails sent.

And for the record I will be PM'ing Rich and Anthony to see if they wanna scan them for possible reproduction sometime in the future.
 
Yes repro some for sure, hell i need a Galaga 88 cpo but not enough money right now...damnit always the tale of the tape. Some great looking items also the 88 side art you dont see that to much..
 
I totally want a Galaga one, but my Galaga in is rough shape, it would be a shame to waste it on my cabinet. Maybe someone will buy it and do a really nice high resolution scan?
 
I totally want a Galaga one, but my Galaga in is rough shape, it would be a shame to waste it on my cabinet. Maybe someone will buy it and do a really nice high resolution scan?

Yes repro some for sure, hell i need a Galaga 88 cpo but not enough money right now...damnit always the tale of the tape. Some great looking items also the 88 side art you dont see that to much..

Emails sent.

And for the record I will be PM'ing Rich and Anthony to see if they wanna scan them for possible reproduction sometime in the future.

For the record the galaga 88' files at least was a thread I posted a while ago... I'm pretty sure that's what Anthony used for his reproductions. If not this is my thread from 2009 on BYOAC.. The artwork marquee, side art, and CPO were already vectorized...http://forum.arcadecontrols.com/index.php/topic,92163.0.html

I'm not sure what I did with the original files I probably need to dig them up off my HDD... should people still need them...

On quarterarcades site is just the repro CPO's which very coincidentally came out right after my scans / files were vectorized: http://www.quarterarcade.com/Game.aspx/10133 at 65.00 seems like a bargin now.. They certainly don't pop up often as I had to hunt my NOS artwork down literally piece by piece.. for the purists grab them as they are tough to find.
 
For the record the galaga 88' files at least was a thread I posted a while ago... I'm pretty sure that's what Anthony used for his reproductions. If not this is my thread from 2009 on BYOAC.. The artwork marquee, side art, and CPO were already vectorized...http://forum.arcadecontrols.com/index.php/topic,92163.0.html

I actually have one of the Galaga 88 repro CPOs. I'm fine with a nice silkscreened repro, but I picked up a Pac-Mania CPO, Pac-Mania side art, and Galaga 88 side art from the Tuckmeister.

Too bad nobody reproduced the marquee translite and nobody has cut files for that series of cabinet. Still need to find marquees, project cabs, and a Pac bezel I guess (unless Pac just had a shroud, I don't remember).

So are there good scans already out there for the Pac CPO and side art? If so I guess that just saves me on shipping. :D
 
I actually have one of the Galaga 88 repro CPOs. I'm fine with a nice silkscreened repro, but I picked up a Pac-Mania CPO, Pac-Mania side art, and Galaga 88 side art from the Tuckmeister.

Too bad nobody reproduced the marquee translite and nobody has cut files for that series of cabinet. Still need to find marquees, project cabs, and a Pac bezel I guess (unless Pac just had a shroud, I don't remember).

So are there good scans already out there for the Pac CPO and side art? If so I guess that just saves me on shipping. :D


I believe I have an extra Pac-mania bezel & Galaga 88 translite, pm me if your interested thanks
 
Back
Top Bottom