Rampage CP button layout anyone?

R64

Well-known member

Donor 3 years: 2013, 2021-2022
Joined
Jul 22, 2013
Messages
1,040
Reaction score
30
Location
Rural, NSW, Australia
My Rampage is currently being rescued from a dodgy SF2 conversion.

Can anyone help me out with a trace or notes on the positions of the buttons and rotation of the sticks?

Thanks ..?
 
I have one at home. What would be most helpful?

I don't have the tools or experience to do a nice 3D model or CAD drawing but happy to do what I can.
 
I have one at home. What would be most helpful?



I don't have the tools or experience to do a nice 3D model or CAD drawing but happy to do what I can.



Brilliant thanks mate. I guess just X,Y coordinates from the edges? Pics with a ruler?
If you have a plan or if the panel is off, you could scan it, in pieces even, with edges and a ruler in the scan..?

If anyone had a NOS overlay, a scan of the back would work.
 
Ok, here's what I came up with. I know it's a little hokey but I hope it will be of some help. All measurements are inches. They were measured perpendicular from the side and to the center of each button or joystick.

The dimensions on the whole panel are 27 1/2 across the top, 10 1/2 on each side, 10 on the inward slants and 8 1/2 across the bottom.
 

Attachments

  • rampage_markup.jpg
    rampage_markup.jpg
    92.4 KB · Views: 33
Ok, here's what I came up with. I know it's a little hokey but I hope it will be of some help. All measurements are inches. They were measured perpendicular from the side and to the center of each button or joystick.



The dimensions on the whole panel are 27 1/2 across the top, 10 1/2 on each side, 10 on the inward slants and 8 1/2 across the bottom.



That is fantastic. Thanks so much mate. Brilliant!
 
Back
Top Bottom