D_Harris
Well-known member
Can anyone tell me if it is preferable to run a Rally-X boardset with the original power supply PCB or a new switcher?
The image below shows the power supply board in a Rally-X cocktail cabinet I just parted and the harness is evidently hacked. There was one lead soldered directly to the power supply PCB.
(In fact there is no on/off switch anywhere on the outside of this cabinet, which was powered on by plugging in the AC power cord).
Thanks.
Darren Harris
Staten Island, New York.
The image below shows the power supply board in a Rally-X cocktail cabinet I just parted and the harness is evidently hacked. There was one lead soldered directly to the power supply PCB.
(In fact there is no on/off switch anywhere on the outside of this cabinet, which was powered on by plugging in the AC power cord).
Thanks.
Darren Harris
Staten Island, New York.