Quick repair job in Kenosha, WI - Trackball hookup to ArcadeSD board

john2654

Well-known member

Donor 3 years: 2011, 2020, 2024
Joined
Mar 30, 2010
Messages
6,426
Reaction score
1,272
Location
Rhinelander, Wisconsin
Quick repair job in Kenosha, WI - Trackball hookup to ArcadeSD board

About 2 years ago, I replaced a trackball in a newly produced Centipede cabinet that had a 6-in-1 jamma PCB in it. I remember it being wired for Centipede and had an adapter that allowed jamma.

The guy moved south a while ago and just called me that he popped in a new ArcadeSD board and the trackball does not work. I know the trackball is wired different than the multi board that was in it prior.

Too far for me and he has no idea. Anyone in the area that would like the job, he is looking.
I have his contact info if interested.

Thanks!

attachment.php
 
Once the trackball plus and minus wires are connected to the Player 2 Up, Down, Left, Right wiring on the jamma harness.

There is a menu entry for ArcadeSD to set P2 as trackball. That is easy to overlook.
The menu also lets you test the directional movement and flip anything needed.
 
Back
Top Bottom