Quick opinion needed on Super Neo 29 monitor problem - Pics included

CJ_IIDX

New member
Joined
Jul 9, 2009
Messages
1
Reaction score
0
Location
Maryland
Quick opinion needed on Super Neo 29 monitor problem - Pics included

Hi everyone it's been a while since I've had time/money to work on my cabinet but now I'm back at it. Unfortunately after turning the cab on for the first time in a while half of the monitor is dark. I think it's because I accidentally broke the brightness adjustment knob somehow but I'm not 100% sure. Also I disconnected and reconnected every plug to the power supply and all the button wires so I wonder if that may have caused this.

Here's a picture of the monitor....
http://img132.imageshack.us/img132/6626/sn850504.jpg

And here's a picture of the brightness knob that I broke D=
http://img44.imageshack.us/img44/5239/sn850505.jpg

If anyone can recognize what this problem is I'd really appreciate some advice on what to do and where to look for parts. Thanks in advance!
 
I read something about that very same problem in Randy Fromms Big Blue book. I can't remember what it was, but I would fix the obvious first. (Broken Pot) Bob Roberts has them. (I know because I broke one not too long ago on a 25" Neo Geo remote board.) You just need the ohm value off the old pot. Email him with the value.
 
Back
Top Bottom