Quick Midway SI ROM placement/direction question

nerdygrrl

Well-known member
Joined
Dec 24, 2010
Messages
3,329
Reaction score
495
Location
Portland, Maine
I have a Midway SI board missing all of the EPROMS, I just got a new set in. Can anyone tell me which direction they should face?

For example, if A1 is on top should the labels be facing upright so they can be read? It seems like the other chips are all facing that way and I would assume the same would be true for the EPROMS, I just wanted to double check before I installed.

IMG_3532.jpg
 
See the notches in the sockets on the upper end. That's the pin 1 and 24 end. Typically it matches the notch in the chip or the pin one dot on the chip.
 
Back
Top Bottom