Quick G07 question

StreetzKing

Well-known member

Donor 2013
Joined
Jul 27, 2008
Messages
6,344
Reaction score
237
Location
Hyde Park, New York
I am hooking up a 60in1 with a G07, brand new jamma harness from bob, Can someone just let me know how the monitor hook up should be (the 6 pin ((really 5)), RGB Gnd Sync)

I had it in that order from left to right but the monitor was wacked out, look like my burn had full color, wasnt showing anything that was playing at all, not even distorted or anything and the screen is rolling like a river. LOL so im assuming the sync isnt on the right pin
 
Looking at it from the back of the cabinet, you'd see the two rows of pins like this:

321

654321


Okay, the 6-pin connector in front would be populated like this:

1 - Red
2 - Green
3 - Blue
4 - Ground
5 - Empty
6 - Empty

The 3-pin connector behind it would be populated like this:

1 - Empty
2 - Sync
3 - Sync

Sync gets jumpered to both pin 2 and pin 3.

You may find it necessary to adjust the vertical or horizontal hold pot...
 
Back
Top Bottom