Wolfinator
Well-known member
As you can see, just a hollow, solid tube connecting the back of the
eject mechanism to the bent arm of the microswitch and you are set.
It took about two minutes to do it and adjust it until it worked right. I used
a tube from an rc car antenna, but a hollow lollipop stick would work too.
Sorry, the pics are sideways!
eject mechanism to the bent arm of the microswitch and you are set.
It took about two minutes to do it and adjust it until it worked right. I used
a tube from an rc car antenna, but a hollow lollipop stick would work too.
Sorry, the pics are sideways!
