quick and easy k7000 question

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,145
Reaction score
2,593
Location
Eureka, California
There are 2 wires coming from the flyback that get connected (somewhere)

edit: the first wire goes to the neck socket,
the other one looks like it connects to the neckboard as well via a little connector. (basically in the center of the neckboard)
Can someone confirm or deny this for me?
 
Last edited:
The larger diameter wire is the focus voltage wire and it connects to the focus terminal of the tube socket on the neckboard.

The smaller diameter wire is the screen voltage wire and connects to the round pin terminal near the tube socket.

Do not confuse these wires when connecting or damage to the monitor will result.
 
The larger diameter wire is the focus voltage wire and it connects to the focus terminal of the tube socket on the neckboard.

The smaller diameter wire is the screen voltage wire and connects to the round pin terminal near the tube socket.

Do not confuse these wires when connecting or damage to the monitor will result.

got it Ken, THANKS!

I have a 100% beautiful off road now. monitor is perfect, board is perfect.
 
Back
Top Bottom