Questions about my RCA 19vltP22?

phatchit

Member
Joined
Feb 17, 2010
Messages
579
Reaction score
2
Location
Davenport, Florida
First its in a ms pacman.I was wondering a few things 1. the bottom of the picture is brighter than the top is there a reason for this? 2nd is it possible to buy an old 19" rca tv and take the tube out and swap it ? If so what model or year do I need .Thanks .Peace!~
 
Post a picture of the back of the monitor. RCA is the tube, the monitor is likely a WG4600 or a G07.
 
Sounds like an Electrohome GO-7 with a bad cap on the neck board. Yes, you can swap tubes from old TV sets.

Pics would be helpful though.

Matt
 
One side brighter than the other is a cap issue. Rebuild the monitor...
 
Sorry this took so long here are some pics.WHat cap kit do I need ?THanks guys .Peace~!
 

Attachments

  • IMG_1541.jpg
    IMG_1541.jpg
    90.6 KB · Views: 42
  • IMG_1544.jpg
    IMG_1544.jpg
    88.8 KB · Views: 39
  • IMG_1545.jpg
    IMG_1545.jpg
    90.2 KB · Views: 47
and some more
 

Attachments

  • IMG_1542.jpg
    IMG_1542.jpg
    90.3 KB · Views: 34
  • IMG_1543.jpg
    IMG_1543.jpg
    82.6 KB · Views: 27
  • IMG_1546.jpg
    IMG_1546.jpg
    87.4 KB · Views: 30
I need someone to cap this for me ! I would but this is for a friend and i havent capped a chassis yet and i dont want to screw up.If some one can for a good price that would be sweet! Im getting this for a friend to get him into the hobby. Thanks guys for everything
 
also in the first set of pics pic#2 looks like the yoke is cocked to one side with the red wire from the flyback under it that should not be that way try getting the yoke in properlly as well
 
Back
Top Bottom