Question: Satan's Hollow Boardset

D_Harris

Well-known member
Joined
Jan 27, 2008
Messages
2,518
Reaction score
51
Location
Staten Island, New York
Can anyone tell me what I need to power a Satan's Hollow boardset?

And is a PCB like the one pictured below needed with the three board set?

Thanks.

Darren Harris
Staten Island, New York.
 

Attachments

  • Linear Power Supply.jpg
    Linear Power Supply.jpg
    82.3 KB · Views: 19
pretty sure you have a power brick in the cab and the board you picture to power the game. I believe that board supplies the 5v and 12v. Not sure off hand what voltages the power brick puts out. BTW the board you picture can be replaced with a switcher if necessary.
 
Can anyone tell me what I need to power a Satan's Hollow boardset?

And is a PCB like the one pictured below needed with the three board set?

Thanks.

Darren Harris
Staten Island, New York.

The picture is a MCR (re: Satan's Hollow) power supply. If you're asking, what's needed to power up a Satan's Hollow motherboard set.....5VDC, 12VDC, and (maybe) a reset signal. Some MCR games need the reset signal...some will boot without it (I've personally never tried Satan's Hollow). The reset signal is supplied by the power supply board.

Edward
 
Thanks, p1899m, MoreBeer, and ELutz for clearing this up. (I'll ignore the troll, who as usual had nothing intelligent to say).

All I need is confirmation on the reset signal possibility.

(I just picked up a Satan's Hollow PCB boardset and want to try it out in one of my cabs).

Darren Harris
Staten Island, New York.
 
(I just picked up a Satan's Hollow PCB boardset and want to try it out in one of my cabs).

Darren Harris
Staten Island, New York.

If you're looking to just power it up....you can plug it into any MCR game's cabinet. All you need is the power connector and the monitor connector plugged in.

Edward
 
If you're looking to just power it up....you can plug it into any MCR game's cabinet. All you need is the power connector and the monitor connector plugged in.

Edward

I don't have any MCR cabinets. So I'd have to whip up an adaptor for use with JAMMA.

Thanks.

Darren
 
That should be funny to watch... please post the video on youtube.

If you want to be amused, grab a mirror.

...says the feeb who still hasn't realized that almost all power supplies are interchangeable... there's nothing magic about a 90412.

And that has nothing to do with anything I said.

Darren Harris
Staten Island, New York.
 
Back
Top Bottom